contact us

inflatable model supplier
China inflatables Factory

Happy Inflatable Co.,LTD.

We provide customers with quality products and provide high-quality services.

看不清,请点击我!

If you would like to leave us a comment please go to contact us

contact-clo

What's the Function of Giant Inflatable Tent?

  • source:happy-inflatable
  • Time:09/06/2018

The giant inflatable tent is a tent, which adopts the principle of structural mechanic design framework, by making use of the characteristics of gas pressure gasbag swell form has a certain rigid cylinder. Through the organic combination of propping up tent frame. The inflatable tent is also called a closed air tent, which is inflated once and can be used all the time.

giant inflatable tent

As skeleton materials, strength size, can set up a tent bearing size, uses the high polymer coating performance and determines the service life of the framework and frame rigid. The rationality of the air chamber is set, then determines the framework. It mainly used for moisture-proof, waterproof, anti-wind, dustproof, sun protection, emergency relief, field short training, and short field operation, which are manufactured by inflatable tent manufacturers.

The Main Function:

Anti-moisture, anti-mosquito insulation, anti-infrared, flame retardant, etc. The tent, however, is designed in the shape of a column and adopts an internationally popular form. The product has the characteristics of high stability, strong shearing and splitting wind, and no rain.

Assembly Knowledge:

First, select a flat place on the ground, then open the package, spread the inflatable tent on the ground, start to inflate with a high-pressure air tent pump, stand one person at each corner, pull the rope to prevent the side from standing upright until it is supported. Finally, the ground anchor was hit and the winding rope was tightened.

Common Problem:

Q: What should I do if the inflatable tent is leaking?

A: If you find any air leaks, you can wipe the air column first and then apply the surface with soapy water to check for leaks. If the leak point is a small hole, you can use a small piece of circular repair fabric (there is a standard for any size of the inflatable tent), then brush the glue, after the glue is dry (important, must wait for the special glue to dry After that, it is attached to the leaking point and the bonding is strict. If the leak is the opening of the air column heat sealing joint, it can be processed in the following steps:

 

  1. Clean the bonding surface first.
  2. The inflatable tent will be given a bottle of glue, inflatable tent gas column special glue, and brush it on the pre-adhesive surface. It must be evenly painted, and the thickness is appropriate. After brushing the picture two times, you can glue.
  3. The shape of the adhesive interface must be designed to be circular or elliptical, and try to avoid the shape of the square and acute angle interface. The overlap width should not be less than 30mm.
  4. After the glue has evaporated, the bonding can be carried out. The patch must be flat, without wrinkles, rolled and smoothed, and the hair source is supplied with a hair dryer to facilitate bonding. After 6 hours of bonding, it can be inflated.
top